PAPR Index

Questions

What most people ask first

Each answer says only what our records or the cited source says. Where our records do not settle a point, we say so and point you at the filters.

Is a PAPR worth it?

In February 2019 HSE strengthened its enforcement expectations for all welding fume, including mild steel welding, after new evidence from the International Agency for Research on Cancer that the fume can cause lung cancer; the Workplace Health Expert Committee endorsed reclassifying mild steel welding fume as a human carcinogen. HSE’s safety bulletin says there is no known level of safe exposure, and that where local exhaust ventilation alone does not control exposure it should be supplemented by suitable respiratory protective equipment. HSE’s welding guidance says:

“A powered air respirator or a supplied air respirator which combines respiratory, eye and face protection, with an APF of at least 20, is the best option for arc welders.”

Whether it is worth the money for you depends on the kit you choose and how often you replace its parts. We show observed market price bands per part on each system page: see replacement-part costs (3M Adflo), or browse all 19 systems.

Speedglas vs Optrel vs Miller: which one?

We do not rank brands. Here is what each record lists for approvals:

3M Speedglas Adflo PAPR: UK/EU EN 12941:1998+A2:2008 (TH2 or TH3 — depends on headtop AND filter (e.g. G5-01 TH3, 9100 Air TH2 per 3M matrix)); US NIOSH 42 CFR 84 (HE (approval-label specific)); AU/NZ AS/NZS 1716:2012 (Respiratory Protective Devices).
Optrel e3000 / e3000X PAPR: UK/EU EN 12941 (TH3); US NIOSH 42 CFR 84 (approved (label-specific configuration)).
Miller PAPR II (Gen 2): US NIOSH 42 CFR 84 (HE (approval-label specific)).

See these three side by side.

Source: our PAPR-PARTS records, each linked to its own manufacturer sources on the system page.

What’s the cheapest one that’s actually legit (certified)?

In our records, “certified” means a system has an approval listed with a source: an EN 12941 (loose-fitting hoods and helmets, TH classes) or EN 12942 (tight-fitting masks, TM classes) class in the UK and EU, or a NIOSH 42 CFR 84 approval in the US. 14 of our 19 systems list an EN approval and 10 list a NIOSH approval.

We do not hold observed market prices for whole kits (our records price parts, not complete systems), so we do not rank systems by price. What we can show is the approval each record lists, and what the parts you wear out cost. Filter by approval: TH3, TH2, NIOSH approved, current systems. Parts cost panels: 3M Speedglas Adflo PAPR, Lincoln Electric Viking PAPR (3350 / 3250D FGS / 3350 XG), Trend Airshield Pro (AIR/PRO).

From our PAPR Parts records · updated

Is a PAPR considered a full face respirator?

It depends which kind of PAPR you mean — "full face respirator" usually implies a tight-fitting facepiece that seals against your skin, and not every PAPR works that way.

Systems like Miller's Face Shield PAPR are built around a loose-fitting polycarbonate face shield rather than a sealed facepiece: air is filtered and delivered through a breathing tube into the shield, but the shield itself doesn't form an airtight seal on your face the way a tight-fitting respirator does.

By contrast, our record for CleanSpace's WORK/CST PRO shows the opposite design: it's a tight-fitting half-mask PAPR, certified under EN 12942 (TM3) rather than EN 12941 (TH-class loose-fitting hoods/helmets). Tight-fitting masks require individual face-fit testing; loose-fitting hoods, helmets and face shields do not, because their protection factor doesn't depend on a facial seal.

So a "PAPR" isn't one single fit category — some are loose-fitting (face shields, welding helmets), some are tight-fitting (half/full masks). Always check your specific unit's approval label and standard (EN 12941 vs EN 12942, or the equivalent NIOSH classification) rather than assuming.

Can I wear one with a beard?

It depends on the kind of facepiece. HSE: “Workers wearing tight-fitting RPE must be clean-shaven, trained how to fit it properly and how to look after it.” OSHA says the employer shall not permit tight-fitting facepieces to be worn by employees who have “Facial hair that comes between the sealing surface of the facepiece and the face”.

Both rules are about tight-fitting facepieces. Our CleanSpace record notes that EN 12942 covers tight-fitting masks and “not EN 12941, which covers loose-fitting hoods/helmets like Adflo or EPR-X1”. Our records say loose-fitting hoods and helmets do not need face-fit testing (below), but they carry no statement about beards for any one system, so we make no claim for them. See the CleanSpace record.

From our PAPR Parts records · updated

Does loose-fitting a PAPR require face fit testing?

No — in both the UK and US frameworks in our records, loose-fitting PAPRs are exempt from fit testing. HSE's INDG479 (October 2025) states "powered or constant-flow airline BA RPE with loose-fitting hoods or helmets do not require fit testing," while tight-fitting power-assisted RPE under positive pressure (EN 12942, TM classes) still does. In the US, OSHA's 1910.134(f) limits fit testing to tight-fitting facepieces; loose-fitting PAPRs — the type most welding headtops belong to — do not require it, though medical evaluation and training still apply.

This exemption is specifically about the fit test, not about approval or maintenance obligations generally — a loose-fitting welding PAPR still needs to be used in its approved configuration (correct headtop, filters and battery per the unit's NIOSH/EN approval label), and UK users still need routine thorough examination under COSHH. If your respirator is a tight-fitting type (e.g. a power-assisted mask to EN 12942, or a tight facepiece under OSHA's APF table), fit testing does apply — check which category your specific system falls into before assuming the loose-fitting exemption applies to you.

From our PAPR Parts records · updated

Can I use CleanSpace with a beard?

Our records don't contain a manufacturer statement specifically addressing facial hair for CleanSpace's CST PRO system, so we won't invent an answer either way.

What the records confirm: the CleanSpace CST PRO is a tight-fitting half-mask respirator, certified EN 12942 TM3 (and NIOSH TC-21C-1269 Class HE in the US with the CST1004 filter) — a different category from loose-fitting hood/helmet PAPRs under EN 12941. Tight-fitting masks rely on continuous skin-to-seal contact to achieve their rated protection factor, and the manufacturer's datasheet confirms this system requires face-fit testing (a Quantitative Fit Testing Kit, PAF-1043, is available for it).

Facial hair at the seal line is a well-established general concern for any tight-fitting mask's ability to pass a fit test — but whether your specific beard and this mask can pass is something only a proper fit test can confirm, not a parts record. If you have a beard, raise it with a competent fit tester or consider a loose-fitting hood/helmet PAPR instead.

Sources

United Kingdom: Welding PAPR Rules, Standards and HSE Guidance (8)
United States: Welding PAPR compliance — OSHA 29 CFR 1910.134, NIOSH 42 CFR 84 and the hexavalent chromium rules (14)

How often do I change filters, and what do they cost a year?

Our records give no fixed calendar interval. 3M’s Adflo documents tie replacement to the loading indicator, alarms and visual checks rather than a number of months (guide below), and Kemppi’s PFU 210e manual recommends changing its particle filter after every work shift in very dirty environments (FAQs below). HSE says:

“Change the filters on respirators in accordance with manufacturers’ recommendations and if: the shelf-life expiry date has passed; they are damaged or visibly contaminated; they become harder to breathe through.”

What a filter, pre-filter, spark arrestor or battery costs is on each system’s cost panel, as dated observed market ranges, not quotes: 3M Speedglas Adflo PAPR, Lincoln Electric Viking PAPR (3350 / 3250D FGS / 3350 XG), Trend Airshield Pro (AIR/PRO). We do not turn those into a yearly cost, because how often you replace each part depends on your work.

From our PAPR Parts records · updated

How often should you change a PAPR filter?

There's no single universal interval — it depends on the manufacturer, the filter type, and how dirty the working environment is. For Kemppi's PFU 210e welding PAPR, the official operating manual recommends changing the particle filter after every work shift in very dirty environments, and never attempting to clean a filter (for example with pressurised air) rather than replacing it.

For the combination gas filter (A1B1E1), Kemppi's manual is stricter: replace it immediately if you can smell the contaminant — a gas filter that lets odour through is no longer protecting you, regardless of how many hours it has logged.

Both filter types sit in a mandatory stack (prefilter, particle filter, and — if fitted — gas filter) and Kemppi's manual states a gas filter must always be paired with a particle filter and prefilter, never used alone.

Because change intervals vary by manufacturer and by how contaminated your air is, always follow your specific unit's manual and its approval-label guidance rather than a generic schedule, and confirm your system's protection class (EN 12941 / NIOSH) before relying on a filter for a given hazard.

From our PAPR Parts records · updated

What is the lifespan of a PAPR filter?

There's no single universal number — PAPR filter life depends on the environment, the contaminant, and which filter stage you mean, so always follow your own unit's manufacturer instructions rather than a generic figure.

For example, Kemppi's PFU 210e operating manual (for its particle filter, part SP010415) recommends changing the filter after every work shift in very dirty environments, and warns never to attempt to clean a filter with pressurised air or reuse it. For the gas filter stage (A1B1E1, part SP009934), the manual instead gives a trigger-based rule: replace it immediately if you can smell the contaminant through it, since gas filters don't have a fixed working-life indicator the way a clogging particle filter does.

Because filter life is condition-dependent and manufacturer-specific, check the operating manual for your exact PAPR model and never extend a filter's use past the manufacturer's stated replacement trigger.

From our PAPR Parts guides · updated

When to change Adflo filters: condition-based, not calendar-based

3M's own Adflo documentation ties filter replacement to the loading indicator, alarms and visual inspection — not a fixed number of months. What the manual actually says to watch for, part by part.

Search "how often to change Adflo filter" and you'll get a different answer from every distributor and forum thread. 3M's own Adflo documentation gives a more useful answer than any of them: it doesn't set a fixed interval at all. Both the current EMEA Technical Datasheet and the US PAPR Assembly User Instructions tie replacement to condition — what the loading indicator, the alarms and your own eyes tell you — not a date on a calendar. This page works through exactly what those documents say to check, part by part, per our four-tier compatibility system.

An Adflo filters air through a stack of parts, front to back, held under one filter cover:

  • Prefilter — 836010 (EMEA, pkg of 5) / 15-0099-99 (US) — the outer, disposable layer that catches the bulk of coarse dust and spatter first.
  • Spark arrestor — 836000 (EMEA) / 15-0009-99 (US) — a metal mesh that stops weld sparks and spatter reaching the particle filter; unlike the prefilter, the manual treats this one as washable and reusable.
  • Particle filter (HE / P SL) — 837012 (EMEA) / 15-0299-99 (US) — the main particulate barrier, and the part the loading indicator is measuring.
  • Optional gas filter — 837242 A1B1E1 (EMEA EN class) or the US 15-0399-99 / 15-0499-99 Organic Vapor/Acid Gas cartridge. These are different classification systems, not the same cartridge under two numbers — a case of the region-sensitive 3M numbering we flag across this site.

Read the full guide on PAPR Parts

TH2 or TH3? Does it stop fumes and smell?

HSE: “Powered respirators used for welding should have a particulate filter. TH2 filters have an assigned protection factor of 20. TH3 filters have a higher protection factor of 40.”

Systems with a TH2 class in their approvals: 4. With a TH3 class: 10. A particle filter is what stops fume particles. Gases and smell are a separate stage: our FAQ below describes an optional gas filter fitted behind the particle filter, and an odour pre-filter for nuisance smells, and says what is fitted must match the system’s approval label.

From our PAPR Parts records · updated

What kind of filter does a PAPR use?

A welding PAPR blower pulls ambient air through a stack of filter stages before delivering it to the headtop. Kemppi's PFU 210e operating manual sets out the pattern clearly: a prefilter first, then a particle filter rated P R SL (particulate, "always use a particle filter and a prefilter" for protection against particles), and optionally a combined gas filter — A1B1E1 class on the PFU 210e — fitted behind the particle filter for organic-vapour/inorganic-gas/acid-gas protection when required.

Two variants exist for the prefilter stage on this system: a standard prefilter, or an odour prefilter for nuisance smells — the manual is explicit that the odour prefilter must not be used at the same time as a gas filter. Other manufacturers' welding PAPRs (3M Adflo, Lincoln Viking PAPR) follow the same general pattern of prefilter → particulate filter → optional gas cartridge, though exact stage names and gas classes vary by brand and headtop. Always match filters to your specific system's approval label — mixing filter types or brands is against manufacturer instructions and can void the approval.

Does my employer have to provide one (HSE / OSHA)?

UK, HSE: “If you cannot achieve adequate control from LEV alone, or it is not reasonably practicable to provide LEV, you must provide your workers with suitable respiratory protective equipment (RPE).” and “for any welding outdoors, you must provide suitable RPE”.

US, OSHA 1910.134(c)(4): “The employer shall provide respirators, training, and medical evaluations at no cost to the employee.” For hexavalent chromium (for example some stainless welding), 1910.1026(c) sets a permissible exposure limit of 5 micrograms per cubic metre of air as an 8-hour time-weighted average.

Sources: HSE, Controlling the risks from welding; OSHA 29 CFR 1910.134; OSHA 29 CFR 1910.1026.

Will it last a full shift on one battery?

It depends on the system and the battery. Our records quote runtimes per battery, for example about 9 hours for Lincoln’s standard Viking battery and about 16 hours for its extended one, and 8 hours for the Jackson Airmax Elite on a new filter (full answers below). They also say runtime falls with a clogged filter, a higher speed setting or an ageing battery. Some system records quote a runtime from the manufacturer or distributor, word for word, under “Battery (quoted from record)” on: Jackson Safety Airmax Elite PAPR (model R60), Jackson Safety AIRMAX+ PAPR, Lincoln Electric Viking PAPR (3350 / 3250D FGS / 3350 XG), Miller PAPR II (Gen 2), Optrel e3000 / e3000X PAPR, Parweld XR943A PAPR (with XR1020 flip-up helmet), Tecmen FreFlow V1 / V3 PAPR.

From our PAPR Parts records · updated

How long does an Airmax battery last?

It depends which Jackson Safety Airmax system and market you have — the figures our records hold differ by SKU set and source:

  • Airmax Elite (model R60 in the EU, 40839 kit in the US): the Jackson Safety EU product page states 8 hours on a new filter with a Li-ion battery, recharging in under 4 hours over 300+ charge cycles. A US technical data sheet states the same 8-hour/14.4V Li-ion spec, while a third-party mirror of the EU R60 manual instead states a 14.4V/2.6Ah battery good for 500 charging cycles — a possible spec update, not reconciled into one number here.
  • Airmax+ (the separate, higher-output blower line): the manufacturer states up to 10 hours with a new P R SL filter at 170 l/min, using a 4-cell 7.4V/5200mAh Li-ion battery with a 5-hour recharge.

Runtime depends on a new filter and airflow speed setting — a clogged filter or higher speed will reduce it. Always use the battery/charger listed for your specific Airmax model and check your unit's manual.

From our PAPR Parts records · updated

How long does the Lincoln 3350 battery last?

It depends on which battery your Viking 3350 PAPR system shipped with. Per Lincoln Electric's own publication (EE14.747), the Viking PAPR platform comes in two battery options:

  • Standard battery (KP3937-1) — 9 hours at 180 l/min airflow, roughly 3 hours to recharge.
  • Extended battery (KP3938-1) — 16 hours at 180 l/min airflow, roughly 4.5 hours to recharge.

Both are Li-ion, rated for around 500 charge cycles, and use the same KP3932-1 charger. The extended battery is the one fitted to the K3930-6 kit (Viking 3350 XG PAPR with Extended Battery); the standard battery ships with K3930-4.

Actual runtime will fall as the battery ages toward the end of its charge-cycle life — if you're seeing noticeably shorter runtimes than these figures, that's consistent with a battery nearing end of life rather than a fault, but check Lincoln's documentation for your exact kit to confirm.

From our PAPR Parts records · updated

What is the battery life of the Lincoln Viking 3350?

This depends on which of Lincoln's two Viking PAPR batteries is fitted, per Lincoln Electric's official publication EE14.747:

  • Standard battery (KP3937-1) — used in the K3930-4 system — runs about 9 hours at 180 lpm and takes about 3 hours to charge on the KP3932-1 charger.
  • Extended battery (KP3938-1) — used in the K3930-6 system — runs about 16 hours at 180 lpm and takes about 4.5 hours to charge.

Both are Li-ion packs rated for roughly 500 charge cycles. The Viking PAPR is NIOSH 42 CFR 84 approved as a loose-fitting PAPR, APF 25, with a three-stage filter (spark screen → prefilter → HEPA). Only the genuine Lincoln battery and charger listed on your system's approval configuration are covered by that approval — this is a manufacturer-listed fit per our four-tier system, so check your unit's approval label before assuming a third-party or rebuilt pack is equivalent.

From our PAPR Parts guides · updated

Adflo battery guide: 35-1099-07 vs 837631 — and what to do when yours dies

The Adflo battery supersession chain (837620 → 35-1099-07 → 837631), official runtimes and charge times from 3M's own manual, and an honest comparison of OEM replacement vs rebuild vs power-tool adapter.

Read the full guide on PAPR Parts

Where do I get spares?

Our records tie 227 spare parts to 16 systems. Each of those system pages has a “Spares that fit” table with the part number, the evidence behind the fit and its date. Parts sold by The Face Mask Store are marked “Our shop” with the date we last checked stock. Start with Adflo, or search all spares on PAPR Parts.

Source: our PAPR-PARTS records; how we earn explains the “Our shop” marking.

Will it work with a hard hat?

Our records do not state this in general. These systems name a hard-hat or safety-helmet headtop, or list an EN 397 (industrial safety helmet) approval, and each line shows the record text:

Also named in a record, with no statement about hard-hat use: 3M Speedglas Adflo PAPR (headtop “Speedglas 9100 MP”).

From our PAPR Parts records · updated

How does JSP PowerCap Infinity work?

JSP's PowerCap Infinity is built around the EVO5 Olympus industrial safety helmet (certified EN 397), fitted with a Twin-Turbo blower unit. The blower draws in ambient air and passes it through TH3P-class filters before delivering roughly 160 litres per minute of filtered air into the helmet — creating a constant flow of clean air around the wearer's head and face, which is what gives a PAPR its protection factor rather than relying on a facial seal.

The system is rated EN 12941:1998+A2:2008 class TH3 (nominal protection factor 500, UK APF 40) — the highest loose-fitting PAPR class under that standard — and pairs the blower with a panoramic EN 166 impact visor for eye protection. Power comes from an 8-hour Li-ion PowerBox2 battery.

This makes PowerCap Infinity a step up from JSP's entry-level PowerCap Active line, which uses a different bump-cap-style headtop (EN 812 A1+ shell) and a lower EN 12941 TH1P rating with its own PowerBox1 battery — the two use entirely separate spare-parts numbering and are not interchangeable.

Always confirm the approval class marked on your own unit's label against EN 12941 before relying on it for a given hazard level.